Aged Oak Finish Mantel

This is a handmade hollow fireplace mantel. We make our mantels by hand putting in a lot of love and care. These mantels are not only beautiful but also practical strong lightweight and stylish. The worried look is created by hand focusing on the little details. Because of this every beam is unique so yours will be special and unlike any other. The size might be a little different from what you picked because of the way wood behaves over time.

We use pine boards to make our Contemporary mantels. The finished product might look a little lighter or darker due to the lighting and the type of wood used.

What you will get: Mantel, installation bracket, screws, and anchors

To make the installation process effortless and quick, a customer will need: Tape measure, Stud finder, Pencil, Level, Drill.

Step 1: Locate studs using stud finder (stud installation is recommended).
Step 2: Using a drill bit, pre-drill holes through the mounting bracket and into the wall. If no studs were located in Step 1, you would need to install provided wall anchors. No wall anchors are needed if studs are present.
Step 3: Attach Part B (SUPPORT) to the wall using provided screws “Part C (SCREWS),” if preferred by the installer, other screws can be used. Make sure it is leveled.
Step 4: Place Part A (MANTEL) on the support. If preferred by the installer, the mantel can be screwed from the above or glued from the inside to the support.

Mantels ship in 5-7 business days for FREE to the lower 48 states. Time in transit is typically an additional 3-4 days. 

Wipe with a soft, dry cloth. To protect finish, avoid the use of harsh chemicals and household cleaners. Hardware may loosen over time. Periodically check that all connections are tight.